3M Red Buffer Low Speed Floor Pads - 12 inch
Specially designed for spray buffing. Cleans when damp; buffs when dry. Quickly cleans and removes scuff marks and enhances floor appearance. Red, 5 per case.
Bar Code : 5 00 48011 08387 7
3M Order Code : 61-5000-4490-6
Specially designed for spray buffing. For use on low speed (175-600 RPM) rotary or automatic equipment.
This product is a floor maintenance buffing pad. The pad is made of polyester fiber in an open textured non-woven construction. Cleaning and polishing abrasive particles are dispersed throughout the non-woven construction and bonded with a durable adhesive. The pad is nominally one inch thick and is made in various sizes.Intended Use
The pad is used for spray cleaning or dry buffing under a rotary floor machine (175-600 rpm). It is also used for light scrubbing under an automatic scrubber.Standard Sizes
Circular discs and other shapes are available in a variety of common sizes.Color
General Requirements: This product shall be made of polyester fibers and synthetic adhesives and shall not be significantly affected by water, detergents and cleaners normally used for floor maintenance. The abrasive cleaning particles shall be natural abrasives. The product shall be reversible and nominally one inch thick.Pad Use and Cleaning
Directions for Use: Dust mop floors before and after spray cleaning or buffing. If floors are heavily soiled, damp mop prior to spray cleaning or buffing. Dust mop prior to scrubbing with automatic scrubber.
Pad Cleaning: Pads may be hosed out using a pressure spray nozzle to remove soil. Pads may be soaked in detergent or diluted stripping solution to dissolve caked-on soil or finish prior to cleaning.