Eraser Burnish Floor Pad - 21 inch
Removes black marks in fewer passes than other pads and retains excellent gloss and image clarity. Excellent durability, and minimal finish removal.
GTIN(UPC/EAN) : 5 00 48011 25859 6
3M Id : 70-0709-1738-3
This product is a floor maintenance burnishing pad for use on ultra high speed floor machines that operate in the range of 1500-3000 rpm. The pad is made of high quality synthetic fibers in a non-woven web bonded with a durable resin system that permeates the entire pad. The pad is nominally one inch thick and available in various sizes.Intended Use
The pad is used on cord electric, battery electric or propane powered floor machines for burnishing 3M floor finished. Also designed for use on other finishes resistant to degradation from burnishing.Standard Sizes
Circular discs and other shapes are available in a variety of common sizes.Color
General Requirements: This product shall be made of synthetic fibers and shall not be significantly affected by water, detergents and cleaners normally used for floor maintenance. The product shall be reversible and nominally inch thick.Pad Use and Cleaning
Directions for Use: Dust mop or sweep floors prior to scrubbing. Pick up scrubbing or cleaning solution with a mop, wet vacuum or automatic scrubber. Rinse floor and let dry prior to recoating or opening to traffic.
Pad Cleaning: Pads may be hosed out using a pressure spray nozzle to remove soil. Pads may be soaked in detergent or diluted stripping solution to dissolve caked on soil or finish prior to hosing out.