Blue Cleaner Floor Pads - 12 inch

For heavy duty scrubbing prior to recoating. Can also be used for heavy duty spray cleaning or foam scrubbing. Removes dirt, spills, and scuffs, leaving a clean surface ready for recoating.

Use on rotary and automatic low speed (175-600 RPM) floor machines.
3M Id : 61-5000-4470-8
GTIN(UPC/EAN) : 5 00 48011 08405 8

This product is a floor maintenance scrubbing pad made of nylon and polyester fibers in an open textured non-woven construction. Abrasive particles are dispersed throughout and bonded to the non-woven construction with a durable adhesive. The pads are nominally one inch thick and available in various sizes.

Intended Use
The product is used with detergent solution to scrub hard surface floors. The product is normally used on low speed rotary floor machines or automatic scrubbers. The product is also used for dry scrubbing floors and heavy duty spray cleaning.

Standard Sizes
Circular discs and other shapes are available in a variety of common sizes.

Color
Blue

Requirements:
General Requirements: This product shall be made of nylon and polyester fibers and adhesives and shall not be significantly affected by water, detergents and cleaners normally used for floor maintenance. The abrasive cleaning particles shall be a mixture of natural and synthetic materials. The product shall be reversible and nominally inch thick.

Pad Use and Cleaning
Directions for Use: Dust mop or sweep floors prior to scrubbing. Pick up scrubbing or cleaning solution with a mop, wet vacuum or automatic scrubber. Rinse floor and let dry prior to recoating or opening to traffic.

Pad Cleaning: Pads may be hosed out using a pressure spray nozzle to remove soil. Pads may be soaked in detergent or diluted stripping solution to dissolve caked on soil or finish prior to hosing out.