Black Stripper Floor Pad - 19 inch
The industry standard against which all other stripping pads are compared. Maintains consistent high performance throughout the life of the pad. For use on low speed (175-600 RPM) rotary or automatic equipment.
3M ID: 61-5000-4442-7
GTIN(UPC/EAN): 5 00 48011 08381 5
This product is a floor maintenance stripping pad made of nylon and polyester fibers in an open textured non-woven construction. Abrasive particles are dispersed throughout and bonded to the non-woven construction with a durable adhesive. The pads are nominally 3/4 inch thick and available in various sizes.Intended Use
The product is used with water-based floor finish stripping solutions to remove old soiled floor finishes and sealers. The product is also used to clean heavily soiled hard surface floors such as concrete when used with appropriate cleaning chemicals. The product is normally used on low speed rotary floor machines or automatic scrubbers.Standard Sizes
Circular discs and other shapes are available in a variety of common sizes.Color
This product shall be made of nylon and polyester fibers and synthetic adhesives and shall not be significantly affected by water, detergents and cleaners normally used for floor maintenance. The abrasive cleaning particles shall be a mixture of natural and synthetic materials.Pad Use and Cleaning
Directions for Use: Dust mop or sweep floors prior to scrubbing with stripping or cleaning solution and floor pad. Pick up dirty solution with a mop, wet vacuum or automatic scrubber. Rinse floor and let dry prior to recoating or opening to traffic.
Pad Cleaning: Pads may be hosed out using a pressure spray nozzle to remove soil. Pads may be soaked in detergent or diluted stripping solution to dissolve caked on soil or finish prior to hosing out.