19 inch Brown Stripper Floor Pad
For wet or dry stripping. Prepares floors for recoating. Quickly and easily cuts through old finish. Conforms to uneven floors.
For use on rotary and automatic low speed (175-600 RPM) floor machines. Also available in 9 inch size.
GTIN(UPC/EAN) : 5 00 48011 08447 8
3M Id : 61-5000-4459-1
This product is a floor maintenance stripping pad made of nylon and polyester fibers in an open textured non-woven construction. Abrasive particles are dispersed throughout and bonded to the non-woven construction with a durable adhesive. The pad is nominally one inch thick and is made in various sizes.Intended Use
The pad is used with water based floor finish stripping solutions to remove old soiled floor finishes and sealers. The product is also used to clean heavily soiled hard surface floors such as concrete when used with appropriate cleaning chemicals. The product is also used for dry stripping floors using minimum moisture content stripping chemicals.Standard Sizes
Circular discs and other shapes are available in a variety of common sizes.Color
General Requirements: This product shall be made of nylon and polyester fibers and synthetic adhesives and shall not be significantly affected by water, detergents and cleaners normally used for floor maintenance. The abrasive cleaning particles shall be of synthetic material. The product shall be reversible and nominally one inch thick.Pad Use and Cleaning
Directions for Use: Dust mop or sweep floors prior to stripping. Pick up stripping or cleaning solution with a mop, wet vacuum or automatic scrubber. Rinse floor and let dry prior to recoating or opening to traffic.
Pad Cleaning: Pads may be hosed out using a pressure spray nozzle to remove soil. Pads may be soaked in detergent or diluted stripping solution to dissolve caked-on soil or finish prior to cleaning.